二結晶分光器および構成製品

Picture Title Detail PDF
data
   

Single Cam DCM

<TWD-1C>

The main rotation axis coincides with the surface plane of the 2nd crystal. Shift of the 1st crystal position with respect to the incident beam, which would be caused by simple rotation of the table around the main axis is compensated by vertical motion of the 1st crystal guided by the cam.

Double Cam DCM

<NSM-1>

Double Cam DCM <NSM-1>

This typed DCM is only released by Kohzu.It allows to optimize the distance between double crystal planes and the distance between the double crystal centers at the same time by using double cams.

Calculated  Type DCM

<KHL-6T>

The simplest calculated type DCM.

Long 2nd crystal is mounted instead of using the translation stage to beam direction.

Calculated  Type DCMM

<PHV-30>

This has both Si crystal and multilayer placed in parallel inside chamber. They could be changed with the translation of whole chamber.Long 2nd crystal and multilayer are mounted instead of using the translation stage to beam direction.

Calculated  Type DCMM

<TWF-2>

This has both Si crystal and multilayer placed in tandem inside chamber. They could be changed at same beam offset.Long 2nd crystal and multilayer are mounted instead of using the translation stage to beam direction.

Calculation and Combination Type DCM

<HLD>

The positions of the two crystals in the instrument left are controlled to follow the orbit calculated by a computer. Multiple stages are used for position adjustment so that fine adjustment of Bragg angle and horizontal position adjustment of the beam are possible. Also the crystals are cooled with liquid nitrogen to withstand the thermal load of the beam. This instrument was installed at the Advanced Photon Source (APS) of the Argonne National Laboratory in the USA. -

DCM for Protein

<SMS-6>

This optical concept and the experimental environment are optimized for stability and reproducibility combined with a high degree of flexibility.Swiss Light Source Protein BL DCM.

Compact Germanium Monochromator

<XFCY-003>

This compact Germanium monochromator was designed for high throughput of microCT experiments. Germanium crystals are applied as monochromator crystals for higher flux. This monochromator is located inside an acrylic chamber filling with Helium.

Crystal bender

<SMB-3>

This instrument is sagittal focusing bender for SPring-8 standard bending-magnet beamlines. There is chilled water supply tube for cooling mechanism.

Crystal bender

<SMS-2B>

This instrument is sagittal focusing bender for Swiss Light Source (SLS) insertion device beamlines.

二結晶分光器